Research

  • Research
  • Circular polarization diversity implementation for correlation reduct...
Article

Circular polarization diversity implementation for correlation reduction in wideband low-cost multiple-input-multiple-output antenna

May 19, 2020

DOI: 10.1109/ACCESS.2020.2995723

Published in: Journal

Publisher: IEEE

U Ullah M Al-Hasan S Koziel IB Mabrouk

In this paper, a multiple-input-multiple-output (MIMO) antenna featuring circular polarization diversity, and designed on a common coplanar ground is presented. The proposed antenna design utilizes a coplanar waveguide (CPW) feeding technique with three parallel coplanar ground planes, and two feedlines in-between. For circular polarization (CP), quasi-loops are created by etching slots on the outermost ground planes. With this configuration, circular polarization diversity is induced in the MIMO antenna with the left-hand CP (LHCP) from one antenna and the right-hand CP (RHCP) from the other. The total footprint of the antenna radiator is only 0.78λ 0 × 0.55λ 0 = 0.42λ o 2 . Experimental results show perfectly overlapping impedance and axial ratio bandwidths of 39.3% (4.5 GHz to 6.7 GHz). In addition, average in-band isolation |S 21 | ≤ -15 dB without any added complexity or active circuit elements. The peak realized gain of the antenna is 5.8 dBic with broadside radiation pattern in the +zdirection and envelope correlation coefficient (ECC) of 0.005. The antenna is suitable for multiple applications in the C-band that includes WLAN (5 GHz, 5.2 GHz and 5.8 GHz) and WiMAX (5.5 GHz).

Copyright © 2024 Al Ain University. All Rights Reserved.